Water Purifier and Filter Price in Nepal
Water purifier buying guideWater purifier FAQ
Water purifier buying guide: RO, UV, UF and TDS
The right water filter depends on your water, not on the number of stages printed on the box. Find out where your water comes from and how much is dissolved in it, then pick the technology to match.
1. Know your water and its TDS
TDS, total dissolved solids, is the amount of minerals and salts dissolved in the water. A handheld TDS meter gives you the figure in a few seconds. Kent cites the Indian standard's acceptable limit of up to 500 mg/L for drinking water, but also warns that TDS is a useful sign of water quality, not the whole picture (Kent). Germs don't show up on a TDS meter at all.
The source matters as much as the number. A municipal supply is usually the most consistent, though old pipes and storage tanks can contaminate it. Water from a boring or tube well often has a higher TDS, and tanker water can change from one delivery to the next (Kent).
2. RO for high-TDS boring water
An RO purifier pushes water through a fine membrane, which takes out dissolved salts. Kent recommends RO for homes with high-TDS borewell water or a mixed supply. Many RO purifiers also have a UV or UF stage for germs, which is what "RO+UV" and "RO+UV+UF" in the names mean. An RO purifier also sends part of the water it takes in down the drain.
Check the maximum input TDS on the spec sheet. Livpure rates its Platino Copper for input water up to 2,000 ppm TDS from a borewell, tap or tanker, with an 8.5 litre tank, up to 15 litres an hour, and a 140 to 300V supply range (Livpure). On this page that's the Livpure Platino Plus Copper (RO+UV+UF).
3. UV or UF for low-TDS tap water
If your tap water is already low in TDS, you don't need RO. Kent suggests UV where municipal water picks up germs in storage or pipes, and UF for homes with low-TDS municipal water (Kent). Neither lowers TDS. For example, the Livpure Touch UV is rated for municipal water of 1 to 200 ppm TDS, and Livpure says it doesn't change TDS levels. It also gives an inlet pressure range of 0.3 to 3 kg/sq cm (Livpure). The Kent Inline Gold UF (11041) is a UF filter, as its name says.
A gravity purifier, such as the Livpure Brahma Gravity, works without electricity, which is handy where power cuts are long. Fill it by hand and the water filters down into the lower tank.
4. Extras: copper, alkaline, hot water and pressure
Copper, zinc and alkaline stages are added on top of the main purification, as on the Nexus Zinc Copper Alkaline Water Purifier LUXE and the NEXUS Dispense 12 L, which also has a TDS control. Choose RO, UV or UF first, then the extras. The Livpure Zinger Copper Hot Water Purifier also gives you hot water, and the Livpure Under The Counter (UTC) Neon Plus fits under the kitchen sink.
An RO purifier needs enough water pressure to work. If your water comes from a rooftop tank with a weak flow, the Livpure Booster Pump-100gpd raises the pressure. Ask us which purifier it suits.
5. Plan for filter changes
Filters wear out, and how fast depends on your water. Livpure suggests replacing an RO purifier's outside pre-filter every three to four months, changing the sediment and carbon filters every six to twelve months, and the RO membrane about once every two years. It also says to clean the storage tank once every 30 days (Livpure). High TDS and heavy use shorten those times. Water that starts to taste or smell odd, or a slower flow, means a filter is due. Replacement filters such as the Livpure Sediment Filter 8" are on this page.
Buying from Quality Computer
Every water purifier comes with a VAT bill. We usually deliver all over Nepal in 2 to 5 days, and delivery is free within 15 km on products over Rs 5,000. You can also visit our store on Bhadrapur Road, Birtamode, or call 023-530150 or 9863609150.
More reading: Livpure water purifier price in Nepal · Geyser price in Nepal
Water purifier FAQ
Which water purifier is best for boring water?
Usually an RO purifier, because boring and tube well water often has a high TDS that UV and UF can't reduce. Test the TDS first, and check that the purifier's maximum input TDS is above your figure.
Do I need an RO purifier for tap water?
Not if your tap water is low in TDS. A UV or UV+UF purifier deals with germs from pipes and tanks and keeps the minerals in the water. Use RO if your tap water tests high.
What TDS level is safe to drink?
Kent cites up to 500 mg/L as acceptable under the Indian standard, and calls about 150 to 300 mg/L a comfortable everyday range. A low TDS doesn't mean the water is free of germs, so it still needs UV or UF if it isn't clean.
How often should I change the filters?
For an RO purifier, Livpure suggests the outside pre-filter every three to four months, the sediment and carbon filters every six to twelve months and the membrane about every two years. Hard or high-TDS water wears them out sooner.
Which water purifier brands do you sell?
Livpure, Kent and Nexus. Every price on this page is our current website price.
Do you deliver water purifiers outside Birtamode?
Yes. We usually deliver all over Nepal in 2 to 5 days, and delivery is free within 15 km on products over Rs 5,000.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|