Online Shopping

Product Image

Baseus Star Mosquitoes Killing Lamp (ACMWD-AHX02)

₨ 3,000.00 ₨ 3,000.00 3000.0 NPR

₨ 3,000.00

Baseus Star Mosquitoes Killing Lamp (ACMWD-AHX02)

Name: Baseus Star Mosquito Killing Lamp
Colour: White
Rated voltage: DC 5V
Current: 1A
Power: 5W
Working environment requirements: Indoor use Ambient temperature: +5°C to 35°C, Ambient humidity: Max 85%
Mosquito-killing method: Light scent attracting + wind catching
Power supply mode: Type-C port power supply
Executive standard: GB4706. 1-2005

3

₨ 3,000.00 ₨ 3,000.00 3000.0 NPR

₨ 3,000.00

    This combination does not exist.

    Add To Cart

    Baseus

    Baseus Star Mosquito Killing Lamp:

    • Light wave mosquito trapping, with concealed lampshade design. Concealed lampshade design, light source from large lamp, for accurate trapping free from dazzling feelings.
    • Odor-based trapping is lasting and efficient. Simulated human odor, fast diffusion via air channels, for enhancing trapping probability.
    • Vortex flow, strong suction. Once mosquitoes are trapped, it's hard for them to escape the strong vortex caused by draught fan.
    • Suspending magnetic switch. Innovative design, suspending magnetic switch, one ascending, the other descending, one on, the other off.
    • Mother and baby applicable. Lower than 30dB, low noise trapping, safe and quiet for mothers and babies.

    How to use

    Startup of mosquito killer

    After the power is turned on, the mosquito luring ball is placed near the convex portion of the top lamp cover, and the magnetic attraction of the heteropolar magnet causes the mosquito box to be suspended and contact the switch connecting line, thereby turning on the power switch, and the mosquito-lured lamp and the fan start working. Remove the suspended mosquito box and put it back on the power mark, so that the switch cable is in a relaxed state; when the power switch is open, the mosquito killer stops.

    Cleaning up mosquito corpses

    1. Unplug the USB plug from the power supply to stop the mosquito killer.
    2. Rotate in the closing direction as shown in Figure 3 to unlock and remove the rear casing, dump the mosquitoes and rotate in the opposite direction to reset.

    Fan blade and internal cleaning

    1. Rotate in the closing direction as shown in Figure 3 to unlock and unscrew as shown in Figure 4. The fan blade can now be cleaned using a cleaning tool.
    2. Re-assemble following the original procedures after cleaning up.

    Best methods of using mosquito killer:

    1. Be sure to turn on the mosquito killer in the bedroom (at least 3 hours) in advance and do not open it before you go to sleep.
    2. It is better to use in an environment without human to achieve better mosquito eradication effect, because body temperature and odor of human can attract mosquitoes.
    3. This product adopts the physical mosquito killing method, without any medical or chemical components, so it takes time to kill mosquitoes after being turned on.
    4.  At least 24 hours later to view the mosquito storage box, because it is the use of physical mosquito control, mosquitoes are dehydrated by air-dried, so the process takes a certain time, if often open, afraid of not dead mosquitoes escape.
    5. When it is the first time to use it, please keep it working continuously for more than 48 hours. Please close doors and windows during the day and pull the curtains to ensure that it is used in a dark environment. Place it about 1 meter above the ground. Do not turn on the lights, do not open the windows and doors, and do not place it in the outlet of air-conditioner or fan, make sure other lights are off and the mosquito killer is the only light source.
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products